5 Vaping Tips Every Vaper Use

Have you been considering joining in on the vaping craze? Well, you’re not alone. Becoming a vapor is one of the most thoughtful lifestyle decisions you can ever make, particularly if you have a history of cigarette smoking.

Vaping has gained tremendous recognition in recent years due to widespread anti-tobacco campaigns sponsored by medical and public health experts. According to medical researchers, vaping is far healthier, safer, and even more economical than traditional cigarette smoking. That’s primarily because, unlike conventional cigarette smoking, no combustion takes place during vaping.

The apparent lack of combustion during vaping also means there’s no smoke production. Therefore, a vapor is exposed to fewer toxins traditionally present in regular cigarette smoke.

But as you may, there are a couple of vaping tips to familiarize yourself with before making the significant leap from traditional cigarette smoking to vaping. This article highlights the top five vaping tips every vaper should know.

1.      Choose a Suitable Vape Material

Most vape materials come in the form of e-liquids. These e-liquids are meant for use with vaporizers known as liquid cartridges. However, you can also decide to vape wax concentrates or dry herbs.

The primary advantage of vaping dry herbs and wax concentrates is that these materials usually contain maximum concentrations of the herb you intend to vape. Also, the materials tend to be in their purer form than e-liquids.

However, e-liquids boast a superior flavor experience. Plus, they allow you to experiment with different nicotine levels, a convenience you don’t find in most wax concentrates or dry herbs.

But whichever vaping material you opt for, remember to purchase ooze 900 battery from reputable sellers.

2.      Take Care of VG: PG Ratios

Vegetable glycerin (VG) and propylene glycol (PG) are the two most common vaping ingredients. Other ingredients include nicotine and flavorings.

Vegetable glycerin is a colorless, odorless, and slightly sweet-smelling plant-based product added to vape oils to aid in vapor production. On the other hand, propylene glycol is a colorless, odorless, and tasteless petroleum-based product known for its flavor-carrying abilities.

Choosing your VG: PG ratios pretty much depends on whether you’re a cloud chaser or flavor chaser. Cloud chasers are better off with more VG than PG in their e-juices, while the converse is true for flavor chasers.

If you’re a new vaper, the convention is to begin with e-juices containing a VG: PG ratio of 60: 40.

3.      Conduction versus Convection Vaping 

Vaporizers come in two heating methods, namely Conduction and Convection heating styles.

Conduction heating refers to the process of heating vape materials (e-liquids, wax concentrates, or dry herbs) via direct contact with a heat source. However, note that direct contact doesn’t mean there’s any flame production.

On the other hand, convection heating involves heating of the vape material by means of hot air that’s blown through the heating chamber. Each of these methods comes with its benefits and drawbacks, as is illustrated in the table below;

  CONDUCTION VAPING CONVECTION VAPING
Heat Distribution Nonuniform Uniform
Temperature Control Better control over temperature intensity More inadequate control over temperature intensity
Speed Conduction vaporizers heat up in as little as 5 minutes Convection vaporizers can take even more than 10 minutes to heat up
Safety Too much heat from a direct heat source can burn the vape material and increase the risks of inhaling smoke Relatively safer as there are almost ZERO risks of smoke production and inhalation
Maintenance Require minimal maintenance and upgrades Require regular maintenance and upgrade
Cost Relatively affordable Tend to be pricy

4.      Mouth-to-Lung versus Direct-to-Lung Vaping

Mouth-to-Lung (MTL) is a vaping technique whereby you draw in vapor from your e-cig to your mouth and hold it there before breathing it into your lungs. It creates a drag similar to the feeling of sucking air from a coffee straw. This vaping technique is recommended for vaporizers with higher resistance coils and higher nicotine concentrations.

The following is how to go about MTL vaping;

  • Draw vapor slowly into your mouth for a few seconds
  • Close your mouth and hold the vapor for around two seconds
  • Open your mouth and swallow the vapor into your lungs
  • Wait till all the vapor has reached your lungs, then exhale

In Direct-to-Lung (DTL) vaping, you don’t hold vapor in your mouth. Instead, you swallow the vapor directly into your lungs. The drag feels like sucking through a milkshake straw. Direct-to-Lung vaping is recommended for larger vaporizers that feature lower resistance coils and lower nicotine strengths.

The procedure for DTL vaping is simple and straightforward;

  • Draw vapor into your lungs quickly
  • Exhale immediately
  • Repeat the cycle

5.      Change Flavors Often

Whether you’re a new or seasoned vaper, the chances are that you’re going to need to change your flavor sooner or later. That’s because vaping from the same flavors can create a condition known as vaper’s tongue or vaper’s fatigue.

Vaper’s tongue occurs due to reduced ability to taste the flavors in an e-juice. Besides resulting from inhaling specific vape flavors over a long duration, vaper’s fatigue can also result from improper temperature settings, dehydration, and vaping excessively.

Fortunately, there are numerous ways to fix a vaper’s tongue. Most notably, changing your flavors from time to time.

 EndNote

The above-highlighted vaping tips are suitable for beginners and pro vapers alike. Not only will these tips help you savor your vaping experience. Some of them may also go a long way in prolonging your vaporizer’s durability.

Leave a Reply

Your email address will not be published. Required fields are marked *